-
M. Chen,
D.
Yao, and B. Kim, "Optimization of Process Conditions in Gas
Assisted Injection Molding", Polym. Plast. Technol. Eng.,
Accepted, 2000.
-
M. Chen,
D.
Yao, and B. Kim, "Eliminating Flow Induced Birefringence and
Minimizing Thermally Induced Residual Stresses in Injection Molding
Parts", Polym. Plast. Technol. Eng., Accepted, 2000.
-
D. Yao, B. Kim, J.
Choi, and R. Brown, "Optimizing Injection Molding Toward Multiple Quality and Cost Issues",
Polym. Plast. Technol. Eng., Vol, 38, No. 5,
pp.955-966, 1999.
-
R.
Sahu, D. Yao, and B.H. Kim, "Simulation of Filling Pattern
of Multicomponent Injection Molding", Polym. Plast. Technol.
Eng., Vol. 38, pp.241-254 (1999).
-
D. Yao and
B.H. Kim, "Direct Search-based Automatic Minimization of Weldlines in Injection Molded parts",
Polym. Plast. Technol. Eng., Vol.37, No. 4,
pp.509-525,1998.
-
J.
Rioux, D. Yao, and B.H. Kim, "Characterization of the Weldline Strength in Terms Of Crack Growth Resistance in Injection Molded Thermoplastic
Elastomers", Polym. Plast. Technol. Eng., Vol. 37, No. 3, pp.369-383, 1998.
-
R.
Sahu, D. Yao, and B.H. Kim, "Design Methodology for Mininizing Wargape", Plastics Engineering,
Vol. 54, No.5, pp.31-33, 1998.
-
B.H. Lee and
B.H. Kim., "Variation of Part Wall Thicknesses to Reduce Warpage
of Injection Molded Part -Robust Design Against Process Variability", Polym.
Plast. Technol. Eng., 36(5), 791-807, 1997.
-
B.H Lee and B.H. Kim, "Automated Selection of Gate Location based on Desired
Quality of Injection Molded Parts", Polymer Plastics Technology & Engineering
Journal, 35(2), 253-269, 1996.
-
B.H Lee and B.H. Kim, "Automated Design for the Runner System of Injection
Molds based on Packing simulation", Polymer Plastic Technology & Engineering
Journal, 35(1), 147-168 , 1996.
-
B.H Lee and B.H. Kim, "Optimization of Part Wall Thickness to Reduce Warpage
of Injection Molded Parts Based on the Modified Complex Method", Polymer
Plastics Technology & Engineering Journal, 34(5), 793-811, 1995.
-
B.H. Kim
,T.W. Hwang, and H.J. Park, "Predicting Mechanical Properties
of ABSfor injection molded plaque and box", Journal of Polymer Engineering
Science Vol.35, No.15, 1252-1259, 1995
-
B.H.Kim and
M.C. Ramesh,"Automatic Runner balancing of Injection Molds
Using Flow Simulation", ASME Journal of Engineering for Industry, Vol.
117, No. 4 , 508-515, 1995.
|