Graduate Students

• Dipak S. Sheth, "CAD Software for Geometry and Process Analysis of Helical Machining", MS, University of Massachusetts, September 1988. 
• Ashok G. Rao, "Optimal Infeed Strategies and Intelligent Machine Control for Plunge Grinding", MS, University of Massachusetts, May 1989. 
• Neng-Hsin Chiu, "Computer Simulation for Cylindrical Plunge Grinding", MS, University of Massachusetts, September 1989. 
• Dipankar Chowdhary, "CAD Software for Geometrical Analysis and Simulation of Drill Point Grinding", MS, University of Massachusetts, September 1990. 
• Fershid Engineer, "Cooling in Grinding", MS, University of Massachusetts, September 1990. 
• Jayanth Eranki, "Comparison of Grinding Performance for Gel and Monocrystalline Abrasive Wheels", MS, University of Massachusetts, December 1990. 
• Rahul Jindani, "Simulation of Cam Grinding", MS, University of Massachusetts, December 1990. 
• Jongchan Lee, "Fundamental Study of Honing", PhD, University of Massachusetts, February 1991. 
• Bhasker Mittal, "Buffered Phospate Solution for Grinding Titanium Alloys", MS, University of Massachusetts, May 1991 (jointly with G.C. Barber). 
• Thomas Puthanangady, "Superfinishing of Steels", MS, University of Massachusetts, December 1991. 
• John W. Moran, "Geometric Data Input and Output for Profile Grinding Simulation Software", MS, University of Massachusetts, February 1992. 
• Rahul Chaudhari, "Enhanced Superfinishing with Ultrasonic Vibrations", MS, University of Massachusetts, February 1993. 
• Balaji Ekambaram, "CAD Software for Helical Flute Grinding of Milling Cutters", MS, University of Massachusetts, February 1993. 
• Surinderpal Kohli, "Energy Partition for Grinding with Aluminum and CBN Abrasive Wheels", MS, University of Massachusetts, February 1993. 
• Neng-Hsin Chiu "Simulation of Profile Grinding Processes", PhD, University of Massachusetts, September 1993. 
• Changsheng Guo, "Investigation of Fluid Flow and Heat Transfer in Grinding", PhD, University of Massachusetts, September 1993. 
• Natesh Krishnan, "Fluid Flow in Creep Feed Grinding", MS, University of Massachsuetts, February 1994. 
• Jairam Manjunathaiah, "Fundamental Study of Double Disc Grinding", MS, University of Massachusetts, February 1995. 
• Mahesh Ganesan, "Hydrodynamic Forces in Grinding", MS, University of Massachusetts, September 1995. 
• Guoxian Xiao, "Autonomous System for Cylindrical Plunge Grinding Cycles", PhD, University of Massachusetts, February 1996. 
• Jonathan Bo Zhu, "Thermal Aspects of Ceramic Grinding", PhD, University of Massachusetts, May 1996. 
• Sunil Mohan Naik, "Preliminary Investigation into the Machining of Hard Materials", MS, University of Massachusetts, December 1996. 
• Nilesh Shanbhag, "Analysis, Modeling and Simulation of Double Disc Grinding, MS, University of Massachusetts, December 1996. 
• Tae Wook Hwang, "Grinding Energy and Mechanisms for Ceramics", PhD, University of Massachusetts, May 1997. 
• Biju Varghese, "Ultrasonically Enhanced Superfinishing", MS, University of Massachusetts, May 1997. 
• Manohar Rajan, "Simulation of Rotary Carrier and Feed Through Double Disc Grinding", MS, in process. 
• Umesh Subash Baheti, "Environmentally Concious Fluids for Grinding", MS, University of Massachusetts, May 1999. 
• Rohit Sood, "Turning of Hardened Steels", MS, University of Massachusetts, May 1999. 
• Tatiana Chalachilina, "Grinding Simulation", MS, University of Massachusetts, December 1999.
• Dirk Hafenbraedl, “Environmentally Conscious Fluids for Cylindrical Plunge Grinding”, Exchange Student, University of Massachusetts, December 1999.
• Biju Varghese, "Development of Sensor-Integrated Intelligent Grinding Wheels", PhD, University of Massachusetts, September 1999.
• Roland Ballus, “Software for Selection of Superfinishing Cycle”, Exchange Student, University of Massachusetts, December 1999.
• Xiaozhi Zhou, “Simulation-Based Control of Cylindrical Grinding”, MS, University of Massachusetts, June 2000.
• Vinu Varghese, MS, “Environmentally Conscious Fluids for Cylindrical Grinding and Energy partition with Vitrified CBN Wheels”, December 2000.
• Atma Kanojia, MS, “Simulation Software for Helical Groove Grinding”, MS, University of Massachusetts, June 2001.
• Sameer Masurkar, Environmentally Conscious Fluids fpr Superfinishing", MS, University of Massachusetts, January 2001.
• Rama Prasad Upadhyaya, MS, Energy Partition for Grinding with Electroplated CBN Wheels", University of Massachusetts.
• Shi Zhongde, PhD, "Grinding with Electroplated CBN Wheels", University of Massachusetts.

Return to Grinding Research Lab home-page